中文
Home Products Technology Certifications News Exhibitions About Contact 中文 · Chinese
Friction materials seriesFibres for friction materials · brake pads / brake shoes / clutch facingsSpecification basis: per the batch test report

BE-B07 Mineral Fibre

BE-B07 is an asbestos-free man-made mineral fibre model in the BOER BE series for friction materials. Typical melting point ＞1600℃, fibre length/diameter ratio ≥35, shot content ≤1%; asbestos-free and RoHS/SVHC compliant, suitable for brake pads / brake shoes / clutch facings.

Product Overview

What is BE-B07

BE-B07 mineral fibre sample (Friction materials series)

BE-B07 is an asbestos-free man-made mineral fibre model in the BOER BE series for friction materials. Typical melting point ＞1600℃, fibre length/diameter ratio ≥35, shot content ≤1%; asbestos-free and RoHS/SVHC compliant, suitable for brake pads / brake shoes / clutch facings.

Key features

  • Wet-process manufacture: uniform surface treatment and stable quality
  • Low shot content and good dispersibility in formulations
  • High-temperature performance: melting point above 1600 ℃ (white-fibre series)
  • Surface treatment improves bonding with phenolic resin and other binders
  • Asbestos-free; passed SGS asbestos, RoHS and SVHC testing

Packaging & storage

Normally packed in moisture-proof laminated bags or eco-friendly paper bags, with custom packaging on request. Store in a dry, ventilated place away from moisture, open flame and strong oxidizers.

Physical Properties

Typical parameters

Appearance / ColourMelting PointFibre Length/Diameter (L/D)Shot Content (>125 μm)HardnessDensity (g/cm³)Moisture
白＞1600℃≥35≤1%62.1<2%

Note: values above are model typical ranges; each shipment is governed by its batch test report.

Chemical Composition

Composition / raw-material information

SiO2+Al2O3CaO+MgO其他Loss on Ignition
≥60≤30≤3＜1

Note: composition shows model typical ranges; subject to the batch test report.

Certification & Compliance

Testing & certification

  • Asbestos-free: SGS test report CANEC25025290506 (2025-10-22); all 6 asbestos types, including chrysotile, not detected (XRD/PLM, detection limit 0.1%)
  • RoHS: 10-substance test passed, report CANEC25025290502
  • SVHC: 250-substance test passed, report CANEC25025290504, complying with applicable REACH requirements
  • Quality system: ISO9001:2015 certified, registration 0350325Q30014R2S
  • MSDS/SDS: prepared in accordance with REACH Annex II (e.g. EECSSDS2605060802)

See Certifications for certificate and report numbers; originals can be requested for verification.

FAQ

10 things you may want to know about BE-B07

Q1What products or processes is BE-B07 used for?
BE-B07 is an asbestos-free man-made mineral fibre model in the BOER BE series for friction materials. It is manufactured with the wet process and surface treatment, and is suitable for reinforcement formulations for friction products such as brake pads, brake shoes and clutch facings.
Q2How does BE-B07 differ from other models in the same series?
Registered models in the same series include BE-B03, BE-F01, BE-GL3, BE-SL05, BE-S06, BE-G3. BE-B07 is differentiated mainly by melting point, fibre length/diameter ratio and shot content; selection should be confirmed with product documentation and the batch test report.
Q3What is the melting point and heat resistance of BE-B07?
The melting point of BE-B07 is above 1600 ℃ (white-fibre series), suitable for high-temperature braking, sealing and coating applications. Specific values are subject to the batch test report.
Q4What is the shot content and dispersibility of BE-B07?
The shot content (non-fibrous material, >125 μm) of BE-B07 is approximately ≤1%; the wet process gives a more uniform surface treatment and better dispersion, with stable bonding to resins. Subject to the batch test report.
Q5Surface treatment and resin bonding of BE-B07?
BE-B07 is surface-treated by immersion, which improves the fibre specific surface area and surface activity; it bonds well with phenolic resin and disperses readily in formulations.
Q6Does BE-B07 contain asbestos?
No. BE-B07 is an asbestos-free man-made mineral fibre. It has passed SGS asbestos testing (report CANEC25025290506, 2025-10-22); all 6 asbestos types, including chrysotile, were not detected (XRD/PLM, detection limit 0.1%).
Q7Is BE-B07 RoHS/SVHC compliant?
Yes. Boer products have passed RoHS 10-substance testing (CANEC25025290502) and SVHC 250-substance testing (CANEC25025290504), complying with applicable REACH requirements.
Q8Is an MSDS/SDS available for BE-B07?
Yes. Boer can provide MSDS/SDS prepared in accordance with REACH Annex II (e.g. EECSSDS2605060802), and the batch test report is delivered with each shipment.
Q9How is BE-B07 packaged and stored?
BE-B07 is normally packed in moisture-proof laminated bags or eco-friendly paper bags, with custom packaging on request. Store in a dry, ventilated place away from moisture, open flame and strong oxidizers.
Q10How can I request a BE-B07 sample or selection support?
Call the national sales hotline 4006-0763-82 or email info@boerfibre.com. Boer provides selection advice, samples and batch test reports; commercial terms are subject to written confirmation.
Related Models

Other models in the same series

BE-B03Boer BE-series mineral fibre for friction materialsFriction materials series BE-F01Boer BE-series mineral fibre for friction materialsFriction materials series BE-GL3Boer BE-series mineral fibre for friction materialsFriction materials series BE-SL05Boer BE-series mineral fibre for friction materialsFriction materials series BE-S06Boer BE-series mineral fibre for friction materialsFriction materials series BE-G3Boer BE-series mineral fibre for friction materialsFriction materials series

More models and parameters: Friction materials series.

Need a sample of BE-B07 or selection support?

The Boer technical team offers selection, sampling and formulation support.

Call 4006-0763-82 Email us